Tail lift operation teaching, five step practical guide for Dilzu tail lift, hands-on teaching of loading and unloading techniques

一、 Safety preparation before novice operation

According to the "Safety Operation Regulations for Vehicle Tail Plates" issued by the Ministry of Transport, "three inspections and two backups" must be completed before using the tail plate of the top beam column:

Equipment inspection: Confirm that the hydraulic oil level is between the MIN-MAX markings and verify that the folding mechanism is not stuck

Environmental inspection: Remove obstacles within a radius of 2 meters and ensure that the ground slope is less than 3 °

Safety equipment: Wear anti slip shoes and reflective vest, activate the emergency stop protection mode of the remote control to prevent accidental touch

二、 Detailed explanation of the five step operation process (benchmarking against ISO 9001 standard)

STEP1: Unfold the tail lift

Press and hold the 'unfold button' on the remote control for 3 seconds, and the hydraulic linkage system of the top beam column tail plate will unfold at a constant speed of 0.2m/s. At this point, pay attention to observing:

Four sets of nickel plated oil cylinders need to expand and contract synchronously

The folding hinge needs to be fully extended to 170 ° lock position

STEP2: Cargo positioning

Place the center of gravity of the goods in the front 1/3 area of the panel (the red box warning area in the diagram prohibits placing 5). The intelligent pressure sensor of the top beam column tail plate will display real-time load-bearing data and automatically trigger a buzzer alarm when overloaded.

STEP3: Lift Control

Upward operation: Short press the 'Level Up' button until the panel is level with the cargo compartment (error ＜ ± 2mm)

Descent operation: Double click the "descent button" to activate the buffer mode, and the end 10cm will automatically decelerate to prevent impact

STEP4: Tail lift reset

After the loading and unloading are completed, the remote control's "folding button" activates the three-stage storage:

The contraction of the hydraulic rod drives the panel to fold back

Double buckle locking device automatically engages

After folding, the thickness is only 15cm, saving 63% of space

STEP5: Status Confirmation

Check the three color indicator lights:

Green light: The tail lift is fully stored

Yellow light: Hydraulic system standby

Red light: Emergency malfunction requiring maintenance

三、 Technological Empowerment Advantages of Dilzu Tail Lift

Anti misoperation design: The operation command needs to be triggered by a combination of "long press+double-click" to avoid the risk of misoperation

Intelligent protection mechanism: built-in temperature/pressure sensor, automatic shutdown protection under extreme working conditions

Mobile management: View historical operation records and device health through the APP

Tags： Truck loading and unloading technology hydraulic lifting system safety regulations for vehicle mounted tailboards

Article：Tail lift teaching, hands-on teaching of the operation process, so that learning and learning can be successful.

Url：http://www.dilzutaillift.com/kuaishou/step-by-step-tailgate-operation-tutorial-guide.html